| Pump Rotation | Inlet | Outlet |
| Clockwise (D) | X | Y |
| Counter-clockwise (I) | Y | X |
| Pump Part Nº | in³/rev | A (inches) | B (inches) | Pressure port | Suction port | Weight | ||||||
| C (in.) | D (in.) | E | F (in.) | C (in.) | D (in.) | E | F (in.) | lb. | ||||
| ¶ PNC80 | 3.27 | 8.26 | 6.73 | 2.31 | 1.18 | M10 | 1.25 | 2.75 | 1.4 | M12 | 1.49 | 56.1 |
| ¶ PNC100 | 4.06 | 8.52 | 6.98 | 58.3 | ||||||||
| ¶ PNC125 | 5.08 | 8.83 | 7.30 | 60.5 | ||||||||
| ¶ PNC150 | 6.10 | 9.17 | 7.63 | 2.75 | 1.4 | M12 | 1.49 | 3.06 | 1.68 | M12 | 1.96 | 62.7 |
| ¶ PNC175 | 7.11 | 9.48 | 7.95 | 64.9 | ||||||||
| ¶ PNC200 | 8.13 | 9.82 | 8.28 | 67.1 | ||||||||
| ¶ PNC225 | 9.15 | 10.13 | 8.60 | 69.3 | ||||||||
| ¶=13 for drive shaft with ball-bearing support ¶=14 for drive shaft with two shaft seals and intermediate external drain | ||||||||||||
| Part Numbering System | ||||||
| Range | Size | Rotation | Shaft | Flange | Ports | |
| 13PNC | 80 | D | G | 09 | M | |
| With ball bearing | 100 | Clockwise | Splined | SAE "C" | SAE flanges | |
| 14PNC | 125 | I | H | |||
| With double seal + drain | 150 | Counter-clockwise | Straight keyed | |||
| 175 | ||||||
| 200 | ||||||
| 225 | ||||||