Rotor-Unic

Rotor-Unic RU3D and RU3R series actuators offer high-quality performance in terms of smooth, quiet operation, durability and cost effectiveness. Their advanced technical features make them perfect for the automation of pivot-hung doors with a heavy usage.

Actuator equipped with hydraulic sequence that maintains bolts retracted while opening and closing, hence reducing noise level.

Independant pressure safety valves in both directions of operation to prevent injury.

Damping at both ends of stroke to reduce shock and avoid noise.

* Various internal lock (check valve) options :
RU3D : No checks - lock required.
RU3RA : Internal closing end check for mounting A, B and D.
RU3RB : Internal closing end check for mounting C.
RU3RT : Double internal check.

Possibility of coupling a torque unit for openning very large doors

Electric motors fitted with thermal cut-outs to avoid over-heating.

Manual over-ride available to ensure access in case of power failure.

All operators and hydraulic components designed, manufactured and extensively tested in-house.

All internal parts bathed in oil so virtually no maintenance required.

* See mounting option details

Mounting options :

Technical details :

Type RU3**50-11 RU3D50-11

Checks / locks RA - RB - RT -

Power 0.33 HP

Voltage 220V - 50Hz

Capacitor 25µF

Thermal cut-out 90º C

Flow 0,5 l/min

Maximum cycles/hour 80

Working pressure 100 bar

Maximum pressure 130 bar

Operating torque 0-450 Nm

Temperature range 0 - 80º C

Travel time 22 seconds

Fluid type MH-32

	Actuator equipped with hydraulic sequence that maintains bolts retracted while opening and closing, hence reducing noise level.
	Independant pressure safety valves in both directions of operation to prevent injury.
	Damping at both ends of stroke to reduce shock and avoid noise.
*	Various internal lock (check valve) options : RU3D : No checks - lock required. RU3RA : Internal closing end check for mounting A, B and D. RU3RB : Internal closing end check for mounting C. RU3RT : Double internal check.
	Possibility of coupling a torque unit for openning very large doors
	Electric motors fitted with thermal cut-outs to avoid over-heating.
	Manual over-ride available to ensure access in case of power failure.
	All operators and hydraulic components designed, manufactured and extensively tested in-house.
	All internal parts bathed in oil so virtually no maintenance required.
	* See mounting option details
Mounting options :

Type	RU3**50-11	RU3D50-11
Checks / locks	RA - RB - RT	-
Power	0.33 HP
Voltage	220V - 50Hz
Capacitor	25µF
Thermal cut-out	90º C
Flow	0,5 l/min
Maximum cycles/hour	80
Working pressure	100 bar
Maximum pressure	130 bar
Operating torque	0-450 Nm
Temperature range	0 - 80º C
Travel time	22 seconds
Fluid type	MH-32